Hauptwerk question from novice - midi learn?

[spotty]

Is there a "midi learn" type function in the free edition?
I'm using an Axiom 61 as a controller keyboard, and in MyOrgan I was easily able to assign stops to various pushbuttons on my keyboard using midi learn. I am baffled on how to do this with Hauptwerk.

[Ghekorg7]

HI Spotty,

Axiom is one of the best. HW3.30 too.
Assign in HW is a piece of cake.
Separate assign of midi inputs, continuous controllers, switches, as global (all sets loaded)
Also sepatate assign for each set idividually (and saved...).

Please try to read a bit on the manual provided with the Free version. It's real easy. I needs a little time at first, but then all settings are workin' smooth. You just open computer, plug Axiom, open HW, load organ, play as you programmed.

Global settings are accessible from "General settings"
Individual settings from "organ settings"
Organized and logical.

Hope that helps
Ask with more detail on what do you want to assign from Axiom > HW.
Panos

[giwro]

Also, the upcoming version of HW (arriving in January, I hear) will support a MIDI learn function

[ggoode.sa]

Hi, if you are uncertain what the midi messages are that are sent by the Axiom then use a Midi Monitor application to find what they are. Then configure Hauptwerk's Midi Input settings for those messages.
GrahamG

[spotty]

Thanks guys. Will try.

[jgirv]

...+ 1 on Axiom and HW... it takes a bit of doing to track down those assignments, but it can be done. You can assign the buttons on the Axiom to control the General Pistons, for instance.