Hi Matt !
The thing you want is easy.... I got the K88 manual.
Usually, with all my non organ console like keyboards, if I want to use HW3.3, I do the following :
I do not change anything on HW. Just leave as are my settings for my organ controller, ie Gt to Ch2, Sw to Ch1 and Ped to ch3, also Choir to Ch5 and Echo to ch4.
Now the synth keyboards have some switches dedicated to change midi transmit channel.
In Motif is a piece of cake..... I want ch3 I push no.3 buttonn ect
In my SG1D 88 I hold down function and press the according key on keyboard
In CME I just rotate a knob.
In Keystation 88 manual I found this :
"Channel
MIDI data from the keyboard can be sent on any of 16 MIDI Channels. However, certain MIDI devices and MIDI software applications require
the keyboard to send data on a specified channel. If this is the case, you can change the channel the data is sent using the following
method:
< Press the Advanced Functions button to engage Edit Mode.
< Press one of the 16 Channel keys from D1 to E3, according to the Channel that you need.
For example, if a device specifies that you need to send data on Channel 10, press the Advanced Functions button, and then key F2 to select
Channel 10.
The Channel can also be assigned to the Octave “+” and “-” buttons. Once assigned, pressing “+” or “-” will increase or decrease the channel
incrementally. When Channel 16 is reached and “+” is pressed, Channel 1 will be selected. If the Octave “+” and “-” keys are selected to vary
the Channel, the lights above the buttons will not change, since it is not possible to have a Channel with a negative value. Pressing both the
“+” and “-” buttons together will recall Channel 1."
Also in page 6 there's a diagram with a keyboard and all fuctions. As I see channels are note C.D.E ect. Easy. You play with Great on HW, click a button on K88, play now Ped.
Now the Enigma problem...... odd.....
Have you checked if "Swell-Prin4/036wav" exists in your files in Hauptwerk folder?
If it's missing , HW won't load the set. If there is....... hmmmm ...odd at least to me, I've never experienced a situation like this, others yes, but always I followed HW's instructions and solved the issues.
Where did you download Enigma ? As far as I know Al's site has withdrawn it.
I got it a year back and along main files there was a second ODF file to replace the one in main RAR file....
Hope I helped a little
best regards
Panos